ESPALDA

NK200-1B concentración de nitrógeno

Marca:NANBEI

Modelo:NK200-1B

Solicitud:

CONTACTA AHORA Chatea ahora

Detalles de producto

Product Numbers: NK200-1B

Product description: The nitrogen sample concentrator (visible) NK200-1B is mainly used for concentrating or preparing sample in batch. Such as drug screening, hormone analysis, liquid phase and mass spectrometry in the analysis of sample preparation. It works by blowing nitrogen in the surface of sample which is being heated to accelerate evaporating and separating the solvent in the samples without oxygen. Instead of the rotary evaporation instrument, nitrogen sample concentrator can efficiently concentrate dozens of samples simultaneously. The sample surface in the tube can be observed while concentrating.

Product features

1. Synchronously working with heating by dry bath in the bottom and nitrogen blowing on the surface accelerates liquid evaporation and sample concentration.

2. The position of gas needle in air cavity can be adjusted to suit for different types of tubes.

3. The height of the air cavity can be adjusted. The length of a standard gas needle is 150mm.

4. Sample surface in the tube can be observed while concentrating.

5. Gas needle is controlled independently. Separately blow of each needle and flow regulating of each needle are available to avoid gas waste.

6. The entire equipment can be put into ventilation cabinet when the concentration sample in toxic solvents.

7. Built in overheat protection, automatic fault detection and fault beep alarm devices.

8. LED display immediate temperature and diminishing time. Operation is simple and convenient.

Technical Parameters

Model	NK200-1B Visual Nitrogen Concentrator
Temperature Range	R.T.+5°C ~ 150°C
Heating Time	≤30min (from 40°C to 150°C)
Temperature Accuracy (40~100°C)	±1°C
Temperature Accuracy (100~150°C)	±1.5°C
Temperature Uniformity (100°C)	±1°C
Temperature Display Accuracy	0.1°C
Blocks Quantity	1 block
Time Range	99h59min
Nitrogen Flow	0~10L/min
Nitrogen Pressure	≤0.1MPa
Power	400W
Dimensions	260 x 220 x 520 (mm)
Blocks Selection	Refer to “Exchangeable blocks for NK200-1B”

Conventional configuration

Optional blocks from NK01 to NK07. Block can be interchanged easily.

Optional flow regulating valve.

Blocks replacement for NK200-1B Series

Type	Tube Diameter	Tubes	Block Size (mm)
NK01	10 mm	12	153.5 x 96 x 49
NK02	12 mm	12	153.5 x 96 x 49
NK03	13 mm	12	153.5 x 96 x 49
NK04	15 mm	12	153.5 x 96 x 49
NK05	16 mm	12	153.5 x 96 x 49
NK06	19 mm	12	153.5 x 96 x 49
NK07	20 mm	12	153.5 x 96 x 49