ESPALDA

Concentrador de nitrógeno NDK200-1

Marca:NANBEI

Modelo:NDK200-1

Solicitud:

CONTACTA AHORA Chatea ahora

Detalles de producto

Product Numbers: NDK200-1

Product description: NDK200-1 nitrogen concentrator is mainly used for enrichment of large-volume sample or preparation (such as drug screening, hormone analysis, liquid phase, and mass spectrometry in the analysis of sample preparation). Working principle: the nitrogen into the heated surface of the sample and make the solvent t evaporate and separated rapidly, thereby reaching the sample enrichment purpose without oxygen, keep the sample purer. Nitrogen concentrator instrument can concentrated dozens of samples simultaneously, saving time and high efficient, instead of rotary evaporation instrument

Product features

1. Synchronously working with heating by dry bath in the bottom and nitrogen blowing on the surface accelerates liquid evaporation and sample concentration.

2. The position of gas needle in air cavity can be adjusted to suit for different types of tubes.

3. The height of the air cavity can be adjusted. The length of a standard gas needle is 150mm.

4. Gas needle is controlled independently. Separately blow of each needle and flow regulating of each needle are available to avoid gas waste.

5. The entire equipment can be put into ventilation cabinet when the concentration sample in toxic solvents.

6. Built in overheat protection, automatic fault detection and fault beep alarm devices.

7. LED display immediate temperature and diminishing time. Operation is simple and convenient.

8. Standard configured air cavity and adjustable bracket.

Technical Parameters

Model	NDK200-1 Nitrogen Concentrator	NDK200-2 Nitrogen Concentrator
Temperature range	RT+5℃ to 150℃
Heating time	≤30min （from 40℃ to 150℃)
Temperature accuracy（40~100℃）	±0.5℃
Temperature accuracy（100~150℃）	±1℃
Temperature uniformity（100℃）	±0.5℃
Blocks Quantity	1 pieces	2 pieces
Time range	99h59min
Nitrogen flow	0—10L/min
Nitrogen pressure	≤0.1MPa
power	200W	400W
Dimensions	230x200x500 mm	260x220x500 mm
Blocks Selection	Refer to the “ Exchangeable blocks for NDK Series”

Conventional configuration

Optional blocks from DT01A to DT18. Block can be interchanged easily.Optional flow regulating valve.

Exchangeable blocks for NDK Series

Type	Description	Block Dimension (mm)
DT01A	Φ6 mm x 12	95.5 x 76.5 x 50
DT02A	Φ7 mm x 12	95.5 x 76.5 x 50
DT03A	Φ10 mm x 12	95.5 x 76.5 x 50
DT04A	Φ12 mm x 12	95.5 x 76.5 x 50
DT05A	Φ13 mm x 12	95.5 x 76.5 x 50
DT06	Φ15 mm x 12	95.5 x 76.5 x 50
DT07	Φ16 mm x 12	95.5 x 76.5 x 50
DT08	Φ19 mm x 12	95.5 x 76.5 x 50
DT09A	Φ20 mm x 6	95.5 x 76.5 x 50
DT10A	Φ26 mm x 6	95.5 x 76.5 x 50
DT11A	Φ28 mm x 4	95.5 x 76.5 x 50
DT12A	Φ40 mm x 4	95.5 x 76.5 x 50
DT13A	0.5ml centrifugal tube x 12	95.5 x 76.5 x 50
DT14A	1.5ml centrifugal tube x 12	95.5 x 76.5 x 50
DT15A	2.0ml centrifugal tube x 12	95.5 x 76.5 x 50
DT16A	0.2ml tube x 12	95.5 x 76.5 x 50
DT17	Flat (96-hole Enzyme Plate)	78 x 114 x 26
DT18	customized	customized